DR600 DMR Repeater

Model : DR600

DMR Repeater with slim design


Frequency Range 136-174MHz, 350-400Mhz, 400-470MHz
Channel Capacity 64
Channel Spacing 25kHz/20kHz/12.5kHz
Operating Voltage DC: 13.8V±15%; AC:100~250V 50/60Hz
Current Drain Standby:<1.0A
RF Power Output High Power: 40W(UHF)/45W(VHF)
Frequency Stability 0.5 ppm
Antenna Impedance 50Ω
Duty Cycle 100%
Dimensions(H·W·D)       482.6m×450mm×44mm
Weight 10.8Kg
Digital Vocoder Type AMBE+2™
Digital Protocol ETSI-TS102 361-1,-2,-3,-4


·Professional 1U Design

Professional 1U design saves installation space.


·Outstanding Heat Dissipation

The unique cooling design combines a built-in heat pipe and three fans to ensure efficient heat dissipation, preventing the repeater from over-heating in high output power mode.


·Smart Digital-Analog Auto Detection

DR600 can be configured to analog, digital or mixed mode. In mixed mode, the repeater can dynamically switch between modes regarding on received signal type.


·Accessory Expansion

DR600 supports third party development via a rear port of the repeater. This is achieved via the pin control through the repeater rear port.


·IP Site Link Connection (Optional)

DR600 repeaters can be interconnected via TCP/IP network to expand coverage area.


·LED Indicator

DR600 has 9 LEDs to indicate different status such as power-on, analog repeating, digital repeating, transmitting, receiving, alarm, etc.


·AIS/SIP Interface

It provides AIS/SIP second development interface, allowing dispatch, telephone system and other facilities to be developed by the third party.


·Remote Monitor and Diagnosis

It supports remote monitor/diagnosis and status control.